A centrifuge is a widely used device in laboratories and industrial settings, designed to separate components of mixtures through centrifugal force. To ensure safe operation and extend the lifespan of the equipment, follow these critical guidelines.

I. Safety Precautions

​​

1.Read the Manual 

Thoroughly review the operational manual and safety guidelines before use.

2.Wear Protective Gear 

Use lab goggles, gloves, and appropriate attire based on sample requirements.

3.Balance Loads 

Ensure centrifuge tubes or containers are evenly distributed in the rotor to prevent mechanical damage or accidents.

4.Avoid Over-speeding 

Never exceed the maximum rotational speed specified for each rotor.

5.Regular Inspections 

Check rotors, bearings, and braking systems periodically for wear or damage.

6.Prevent Liquid Leakage 

Use sealed tubes to avoid spills that could corrode internal components.

7.Emergency Stop 

Familiarize yourself with the emergency stop button’s location and operation.

II. Operating Procedures

​​

1.Preparation 

·Place the centrifuge on a stable, flat surface.

·Inspect tubes and rotors for cracks or defects.

·Prepare samples with appropriate volume to avoid overfilling.

2.Rotor Installation

·Securely mount the rotor onto the spindle after opening the lid.

3.Sample Loading

·Insert tubes symmetrically into the rotor to maintain balance.

·Close and lock tube lids tightly.

4.Parameter Settings

·Close and secure the lid before adjusting speed, time, and temperature settings.

5.Operation

·Start the centrifuge and avoid opening the lid during operation.

·Wait for complete cessation before opening the lid post-run.

III. Maintenance & Care

​​

1.Cleaning

·Wipe external surfaces and rotors with mild detergent after each use.

·Avoid abrasive materials that may scratch surfaces.

2.Lubrication

·Apply lubricant to bearings and moving parts as recommended.

3.Calibration

·Schedule periodic calibration to ensure accuracy in speed and timing.

4.Storage

·Store the centrifuge in a dry, ventilated area away from direct sunlight.

IV. Troubleshooting

​​

·Imbalance

Reposition tubes or adjust sample distribution.

·Excessive Noise

Inspect for foreign objects or internal damage.

·Unstable Speed

Check power connections or consult a technician.

·Inaccurate Temperature Control

Verify sensors and refrigeration systems.

By adhering to these centrifuge functions, safety tips, and operational best practices, you can achieve optimal performance and longevity. Contact the manufacturer or a professional for unresolved issues.