Company Name :
Beijing Labonce Thermostatic Technology Co., Ltd.Brand :
LABONCE
Walk-in Stability Chamber
Stability Chamber
Photo-stability Chamber
Constant temperature chamber
Low Temperature Chamber
Biochemical Incubator
Mold Incubator
Constant Temperature & Humidity Chamber
Thermostatic Incubator
Precise Blast Drying Oven
Vacuum Drying Oven
High Temperature & Constant Temperature Chamber
High & Low Temperature And Humidity Chamber
Labonce-GS/CGS series two -chamber comprehensive medicine stability tester, GS series two -chamber independent control of temperature and humidity, CGS series with an additional layer of lighting system, to meet the requirements of the 2020 Pharmacopoeia and ICH regulations, suitable for GMP and CGMP certification users.
❶Reference Standard：ICH2003、Chinese Pharmacopoeia 2020 edition;
❷Insulation material: Overall high-density polyurethane foam technology, with good insulation and moisture retention performance;
❸Chamber Materials:The exterior is coated with high quality steel plate,The liner is made of mirror stainless steel 304, no pollution source, easy to clean;
❹Control system: Programmable color touch screen controller;more than 7 inches,display frequency conversion output ratio;
❺Refrigeration system: Imported fully enclosed compressor;Save more than 50% of electricity and water;
❻Humidity control: Original imported capacitive humidity sensor, high precision, low drift, long life, maintenance free;
❼Data management: configuring needle micro printers and electronic data storage functions;
❽Safety device: Compressor overheat and overpressure overload protection, water shortage protection, dry burning protection system, independent overtemperature protection alarm system;
❾Alarm system：:On-site beeping alarm;
❿Double Door structure：Interior door tempered glass door，Open the outer door to observe the samples，The temperature and humidity inside the container will not change in a short time，The outer door is solid can keep temperature and humidity，It can also prevent the influence of external light;
⓫Other configurations：Test hole、Rubber plug、Mobile casters、Door lock;
⓬Controlling Temperature Precision：Temperature Fluctuation ＜ ±0. 5℃；Temperature Deviation ＜ ±1.0℃ (Without light);
⓭Controlling Humidity Precision：Humidity Fluctuation ＜ ±2%RH；Humidity Deviation ＜ ±3%RH(Without light);
⓮Power：AC220V±10% 50HZ;
⓯Environment Temperature：+5 ~ 35℃ ;
⓰Optional: Temperature- humidity deviation, sudden power failure , control by Remote SMS alarm.
|
|
|
Model |
Temperature Range ( ℃ ) |
Humidity Range (RH) |
Capacity (L) |
Interior Dimensions(mm) W×D×H |
External Dimensions(mm) W×D×H |
Power (kW) |
Shelf (Standard) |
Chamber Structure |
Remarks 1 |
|
Labonce-320CGS-FC |
15~65 |
20~95% |
150 |
680×500×460 |
860×840×1880 |
2.5 |
2/5 |
Up A |
A (Temperature + Humidity + Visible Light + Near Ultraviolet) B (Temperature + Humidity) |
|
150 |
680×500×460 |
2/5 |
Down B |
||||||
|
Labonce-520CGS-FC |
15~65 |
20~95% |
250 |
600×500×830 |
1610×870×1650 |
3.0 |
3/7 |
Left A |
|
|
250 |
600×500×830 |
3/7 |
Right B |
||||||
|
Labonce-620CGS-FC |
15~65 |
20~95% |
300 |
600×500×1000 |
1610×870×1820 |
3.2 |
3/9 |
Left A |
|
|
300 |
600×500×1000 |
3/9 |
Right B |
||||||
|
Remarks 2 |
1）CGS-FC Series: Chamber A is equipped with three functions: temperature, visible light, and near ultraviolet. Illuminance measurement comes standard with visible light and near ultraviolet sensors, and both visible light and near ultraviolet values are automatically printed and stored. 2）Visible light range: 100 ~ 6000Lux, illuminance deviation: 4500 ± 500Lux, the total illuminance of the illumination test shall not be less than 1.2×106 Lux·hr; near ultraviolet range: 0.84 ~ 1.0 w/m², the total illuminance of the near ultraviolet shall not be less than 200w·hr/m².. When lighting is off, temperature and humidity specifications are the same as GS-FC. 3）Temperature fluctuation: < ±0.5°C ； Temperature deviation: < ±1.0°C (when lighting is off) ； Humidity fluctuation: < ±2% RH ； Humidity deviation: < ±3% RH (when lighting is off). |
||||||||
Understand how dual-compartment designs support side-by-side ICH-compliant stability testing.
As demand grows for flexible and space-saving stability testing solutions, multi-compartment chambers have become a key focus at global pharmaceutical exhibitions. At API China 2025, GlobalEquipX collaborated with Labonce to showcase stability chamber solutions designed for parallel testing and efficient laboratory workflows.
Experienced team of scientists and state-of-the-art equipment ensure that every analysis we conduct is accurate & reliable. We are committed providing data.
IPv6 network supportedOur hours
Mon 11/21 - Wed 11/23: 9 AM - 8 PM
Thu 11/24: closed - Happy Thanksgiving!
Fri 11/25: 8 AM - 10 PM
Sat 11/26 - Sun 11/27: 10 AM - 9 PM
(all hours are Eastern Time)
Hello, welcome to 
My Account
Log in
Register
EN
RU
LABONCE
