The STIER Fully Automatic Bottle Washing Machine is designed for cleaning bottles automatically. It can handle bottle conveying, washing, sterilizing, rinsing, and discharging. This machine works with various containers like glass bottles, plastic bottles, and cans. It's widely used in labs, pharmaceuticals, and chemical industries. With modern technology and an automated control system, it completes the entire cleaning process. Compared to manual washing, which is time-consuming, costly, and error-prone, this machine ensures cleanliness while improving efficiency and quality.

Ⅰ.Key components include

1.Conveyor system

Moves bottles from one spot to another.

2.Washing system

Uses high-pressure water and air to clean inside and outside of bottles.

3.Drainage system

Removes wastewater after cleaning.

4.Control system

Automates and monitors the whole process.

Ⅱ.Operation is simple

• Place bottles at the conveyor's inlet.
• Set washing parameters (water temperature, cleaning time, sterilization time, etc.) on the control panel.
• Start the machine. It will automatically convey, wash, and drain the bottles.
• Clean bottles come out at the conveyor's outlet, ready for the next production step.

1. How to Use

• Place bottles on the conveyor.
• Turn on the power and set washing parameters as prompted.
• Bottles enter the washing system, go through cleaning, sterilization, and rinsing, then are discharged.
• After cleaning, turn off the power and clean the machine.

2. Precautions

• Check the machine before use. Contact maintenance if anything is wrong.
• Adjust washing parameters based on actual needs. Ensure they are reasonable.
• Operators must wear protective gear to avoid accidents.
• Clean and maintain the machine regularly to prevent breakdowns.