Pipette Pre-Operation Preparation Guide

Before achieving accurate pipetting results, proper preparation is essential. Many laboratory errors originate from overlooked setup steps, including improper tip installation or incorrect volume settings.

• Inspect the Pipette Condition

Check whether the pipette is intact and free from visible damage before use.

• Check Tip Fit and Plunger Performance

Ensure the tip is securely attached and the plunger operates smoothly without resistance.

• Select the Correct Pipette Tip

Choose high-quality tips that match the pipette specifications. Ensure the tips are free from damage and contamination.

• Set the Required Volume

Adjust the volume by rotating the control knob to the desired setting.

• Install the Tip Properly

Insert the tip vertically into the pipette and press gently while slightly rotating until it is firmly secured.

Proper pipette preparation is essential for accurate liquid handling. Before use, inspect the pipette to ensure it is not damaged. Check that the plunger operates smoothly and that the tip is securely attached. Always select high-quality tips that match the pipette specifications and are free from contamination. Adjust the volume carefully to the required setting. When installing the tip, insert it vertically and press gently while slightly rotating to ensure a firm fit. These preparation steps help minimize errors and improve consistency in laboratory workflows.